Publicité
Les langues disponibles
Les langues disponibles
FEATURES & SPECIFICATIONS
Features
1. Multi-Colour, Multi-Effect LED Par Can
2. 6 In 1 RGBWA+UV LED's
3. Solid Aluminum Die-Cast Housing
4. High Lumens (Brightness), Low Heat, Lower Power Consumption
5. Multiple Control Modes: Automatic, Manual, Audio Chase, DMX
6. Multiple DMX Modes
7. Integrated Microphone for Audio Chase
8. Includes Combination Mounting Bracket / Support Stand
9. DMX in and out
Specifications
Input voltage: 100-240V~, 50/60Hz.
Rated power: 120 W
Light source: 18 x 10W RGBWA + UV 6 in 1 LEDs.
Optical degrees: 40 degrees
Control modes: Automatic, Manual, Audio Chase, DMX
DMX Channels: 6 or 10 channels
Housing material: Die-cast aluminum
Net weight: 2.5 Kg
Packaging dimension: 265 mm x 265 mm x 125 mm
OPERATION INSTRUCTIONS
1. Don't turn on the device if it's been through severe temperature changes, especially after
transportation. Operate at a stable temperature, avoiding drastic temperature changes to help
avoid damage to the LEDs (etc) due to these environment changes.
2. Avoid excessive shock or vibration of this device during transportation or when being moved.
3. Do not handle the light by the head only to help stop any damage to the mechanical parts.
4. Do not expose the device to excessive heat, moisture or environments with dust, especially
during installation. Also, to avoid electric shock, do not run the power lines across the floor.
5. Make sure the location of install is in safe and in good condition before installing the device.
6. Ensure the safety chain is secured properly and check whether the screws are fastened properly.
7. Make sure the lenses are in good condition, it's recommended to replace any lens if there is
any damage or scratches.
8. Make sure the device is operated by qualified personnel who know how to operate the device.
2
Publicité
