Foster FLY 2459930 Manuel D'installation page 6

Before leaning the appliance against the wall, please remove the stainless steel carter
using the 8 perimetrical screws (fig. 3),
then insert the supply cord in the plastic pipe. Fix the appliance without the stain-
less steel external body, which was previously removed from the motor block, by
matching the holes of the motor block with the holes on the wall. Tighten with the
screws supplied.
Connection of the pipes:
the appliance is endowed with an air entrance to be connected with the telescopic
pipes and an air outlet. After fixing the appliance on the external wall, connect the
two telescopic pipes (fig. C), which are placed inside the wall, with the cooker-hood
through the flexible pipes.
The fixing operations have to be carried out by using suitable metallic tools (pipes
and tools have to be supplied by the installers).
Electrical connection to the hood:
the unit is supplied with a pipe 7 meters long. After having let the cable pass throu-
gh the plastic pipe (Fig. e) placed in the wall (fig. d), placed it closed to the unit and
connect the 6 poles connector (Fig.e) and the 2 poles connector (Fig. g).
In order to avoid water infiltrations, please apply silicone on the product perimeter,
close to the wall.
Installation of the external carter:
mount the aesthetic carter making sure that the grill will match with the block motor
air outlet.
6