Publicité
Les langues disponibles
Les langues disponibles
Warning!
The remote fitted exhausting group (external motor) is built in class I plate, therefore
it needs the earth connection.
The appliance was designed to exhaust odors and vapors in the best way. The ap-
pliance is to be installed on the outside wall of the house and connected to the
cooker-hood which is in the kitchen (fig. 1).
Installation:
the mounting of the appliance is to be made by qualified technicians. Using the ap-
propriate drilling jig.
(fig. 2) drill all the holes marked on it into the external wall, by paying attention not
to damage water pipes or power lines. The holes on the wall are to be drilled with a
8 mm. bit.
Insert, step by step, the following parts in the holes drilled:
- the corresponding plastic dowels supplied
- the two telescopic pipes in the hole of 200 mm.
- the plastic pipe of 40 mm. diameter.
5
Publicité
