Faber T-AIR KL A90 Manuel D'utilisation page 6

B Short
Long press on
the leftmost lines
when all loads
are off (motor
and lights)
Long press on
the rightmost
lines when all
loads are
(motor and
lights)
C Short
Long press with
all loads off (mo-
tor and lights)
D Short
Long press with
all loads off (mo-
tor and lights)
E Short
Long press with
light or motor on
Long press with
all loads off (mo-
tor and lights)
6
Press or move your finger from left to right to increase the speed from
1 to 2, 3, Intensive.
The intensive speed is timed for 6 minutes. At the end of this time the
system automatically returns to the previously set speed.
Repeat the operation in reverse to decrease the speed (from right to
left).
Keypad Lock function
Activates/deactivates the keypad lock for hood cleaning.
Induction/Gas Cooktop Selection
Select the type of cooktop in use, either Induction or Gas.
off
The Induction Cooktop is set by default.
Switches the lights on/off at maximum intensity.
If there is an induction cooktop paired with the hood and the hood is
off, as soon as the induction cooktop is turned on, the hood lights
automatically turn on at the maximum intensity.
K-Link pairing
Before starting the procedure follow the specific instructions of the
manuals of the devices to be paired.
Starts the pairing procedure between the hood and compatible K-Link
devices (induction cooktop or remote control). Up to 3 induction cook-
tops can be paired and only one remote control. See the manual of
the devices for details of the operations that need to be performed on
these.
The pairing procedure takes 2 minutes. If no devices are recognised
within this time check that you have previously activated the proced-
ure for the devices to be paired. The maximum number of linkable
devices may have been reached.
Switches the lights on/off at medium intensity.
Performs a saturated Filters alarm reset.
Signals the saturated Metal Grease Filters alarm and the need to
wash them. The alarm is activated after 100 hours of effective hood
operation.
Signals the saturated Activated Carbon Odour Filter alarm. The
alarm is activated after 200 hours of effective hood operation.
Delay Function
Activates/Deactivates the Delay function (automatic shutdown of the
Motor and of the lighting delayed by 30').
Cannot be activated with Intensive or 24h function.
Deactivate the function by pressing the same key or press the A key
for about 1 second to shut down the motor.
24h Function
Activates/Deactivates the motor in the 24h Air Exchange mode, a
speed that allows suction of 10 minutes every hour, for a 24-hour
cycle.
Cannot be activated if the Intensive or Delay modes are active.
K-Link unpairing
Starts the procedure for the cancellation of all compatible K-Link
devices previously paired with the K-Link pairing function.
The display shows the
selected speed.
If the Intensive speed is
selected the display
shows an animation.
All LEDs flashing
1 Flashing LED A: con-
firms the Induction
Cooktop selection.
2 Flashing LED A: con-
firms the Gas Cooktop
selection.
Fixed
The display shows an
animation:
Pairing in progress.
Upon successful com-
pletion of the procedure
all the LEDs will light up
for 2 seconds.
Fixed
The display shows F 3
times, indicating that the
filter reset has been
completed.
With the motor off, the
display shows F + 1
multiple times altern-
ately.
With the motor off, the
display shows F + 2
multiple times altern-
ately.
LED A remains lit (fixed)
and LED E lights up.
The display shows an
animation.
LED A remains lit (fixed)
and LED E flashes. The
display shows an anim-
ation.
Upon successful com-
pletion of the procedure
all the LEDs flash 5
times.