Monacor TM-7 Mode D'emploi page 7

3) To end the recording, set back the switch (1) to the
position SPEECH. The recording LED will be extin-
guished.
If the LED is extinguished during the recording,
the maximum recording time is reached and the
recording will end. Prior to making a new recording,
slide back the switch (1) to the position SPEECH.
4.6 Replaying an announcement recorded
1) Set the selector switch (1) to the position PLAY. The
announcement recorded will be continuously
repeated. The recording LED (4) will shortly light up
each time the announcement starts.
2) Adjust the desired replay volume with the volume
control (5).
3) To end the replay, set back the switch (1) to the
position SPEECH. The replay will stop at the end of
the announcement.
4.7 Switching off the megaphone
To save the batteries, switch off the megaphone after
use or in longer non-speech intervals with the switch (3).
The power LED (2) will be extinguished.
5 Specifications
Amplifier power
Rated power: . . . . . . . 2 W
Peak power: . . . . . . . . 6 W
SPL: . . . . . . . . . . . . . . . . 92 dB at 1 W/1 m
Power supply:. . . . . . . . . 6 x 1.5 battery of size AA
Dimensions: . . . . . . . . . . 250 x 146 x 210 mm
Weight: . . . . . . . . . . . . . . 595 g
Subject to technical modification.
All rights reserved by MONACOR
be reproduced in any form or by any means for any commercial use.
MAX
or via a power supply unit
9 V /300 mA
® INTERNATIONAL GmbH & Co. KG. No part of this instruction manual may
GB
7