Publicité
Les langues disponibles
Les langues disponibles
3.1 Switching On / Off (standby)
Press the <Standby> button on the remote control or on the device to switch on the radio.
Press the button again to put the device into standby mode. To switch it off completely, disconnect it
from the power supply.
3.2 Navigate in the menus
You can navigate through the menus by pressing the <Up/Down/Left/Right> buttons on the remote
control. The selection is confirmed by pressing the <OK> button. These operating steps can also be
carried out on the device using the <NAVIGATE> knob. Turn the knob to navigate through the menus,
confirm a menu item by pressing the knob.
3.3 Adjusting volume and "Mute"
Youcan adjust the volume by pressing the <Louder> and <Softer> buttons on the remote control
or by turning the <VOLUME> knob on the device. Pressing the <Mute> button mutes the radio.
The "Volume muted" appears briefly in the display and a crossed-out speaker symbol appears
in the lower part of the display. Another pressing of the button restores the original volume.
3.4 Additional information
By repeatedly pressing the <INFO> button, depending on the source and station, additional informa-
tion can be displayed:
•
Description
•
Name of the station, the current program, content, topics, etc..
•
Genre
•
The program style (genre) of the station is displayed.
•
Signal level and signal error
•
Bit rate
•
Channel information
•
Today's date and current time
Depending on the audio source, symbols for RDS, stereo reception and reception strength are
shown in the lower area of the display.
3.5 Initial setup
When the device is started for the first time, a DAB+ station search is started, so please extend the
antenna completely. The menu language is English.
3.6 Setting the menu language
To change the menu language, please refer to Chapter 9.6 in the Operating Instructions.
4. Main menu
In the main menu you can select the different audio sources:
•
Digital radio (DAB+)
•
FM
•
Bluetooth
•
Aux input
With the audio source selected, press the <MODE> key on the remote control or on the device to call
up the source selection.
8
Publicité
