Operation - Klarstein 10028498 Mode D'emploi

First Use of the Machine
Before using the appliance for the first time, boil fresh water in it at least twice.
Use
1. Place the machine on a flat surface.
2. Open the lid.
3. Then fill in some water. The water level can be read off using the water level indicator on handle side of
the kettle.
4. Close the lid.
5. Place the kettle on the base.
6. Press on/off button
Boiling water
Without any input in 5 seconds, the kettle starts boiling. During boiling process, you can press other function
buttons. Pick kettle body up from power base, all function buttons stop working. When water is boiled, kettle
beeps 3 times, indicator light turns off, and automatically powers off.
Setting the temperature
Press keep warm button
rature 75 °C > 85 °C > 90 °C > 95 °C in sequence.
After temperature set, kettle beeps 3 times, it starts heating. After maintaining set temperature for 20 minu-
tes, keep warm function shuts off.
Keep warming function
After water heats up to set temperature, it enters "keep warming" status. When water temperature cools
about 3 °C of set temperature, the keep warm function starts.
After use
After boiling the machine switches off automatically. It switches off too, if you remove the kettle from the
base. Disconnect the machine from the mains electricity supply. Do not press up the lid when pouring. Please
wait about 5 seconds to open the lid for refilling to avoid burns.

Operation

. The boiling indicator light (100 °C) illuminates, the kettle stands by status.
8
, indicator light illuminates. Press this button. Now you select the default tempe-
1
10