Publicité
Les langues disponibles
Les langues disponibles
GB
Installation of your light kit at the ceiling fan
A.
14
C.
1.
14
1. Before installing the light kit, the blades must be mounted at the fan!
2. Insert the connector of the lamp and the fan firmly together as shown in Figure A..
3. Infix the three bayonet bolts of the lamp into the openings provided at the fan (Fig. B.)
Do not damage or crush this no cable or the plug!
4. Press the lamp gently up against the fan. Then twist it by about 5 ° to the left as shown
in Figure C..
5. Screw the lamp with 3 screws
(Figure D).
16
Œ
Œ
2.
15
into the provided drill holes at the fan side
B.
Bayonet bolts
14
D.
14
15
Œ
Publicité
