Basic Operation - VINCENT RC-572 Manuel D'utilisation

Point the front of the remote control directly at the front of the appliance,
making sure there are no objects between the remote control and the
appliance. The distance between the remote control and the appliance
should not be more than 7 m, as the reliability of the remote control is
affected beyond this range. Make sure that you do not point the remote
control at an elevated angle to the appliance, as beyond an angle of
±30° to the centre axis the appliance may not respond well to the remo-
te control.
Function keys (example)
VI. IV.
III.
V. VII. V.
V. V.

BASIC OPERATION

I. On the HOME page use the page selection keys (6)(7), if
necessary. The page number is displayed in the title bar.
II. Choose a device key. If an infrared command has bee as-
II.
signed to this key, the associated infrared signal is sent now.
III. Choose the function key (e.g. "on/off"), the corresponding
infrared signal is transmitted.
IV. The infrared transmitter symbol
of the display.
Please note: If a function key has not been programmed
with an infrared command yet, it is displayed in half
tone (dim, greyed). A touch to this key then has no effect.
V. If the desired function key is located on one of the other
function key pages, you can browse the pages using one of
the page selection keys (6)(7).
VI. Again, the page number (P1, P2, ...).is displayed in the
title bar.
VII. Press the HOME key to return to the device selection.
appears in the title bar
Vincent
57