VINCENT RC-572 Manuel D'utilisation page 50

Calibrate the touchscreen
You may see some variance in the responsiveness and accuracy of the
touchscreen when using it in cold and hot environments. The setting de-
scribed here is sometimes necessary at first use of the remote control and
may be necessary again at a later time. You should calibrate the screen if
• a precise touch to one key area provokes no reaction
• an input is only accepted when actuated with unusual high pressure
to the display
• the area next to a key must be pressed to execute its command.
In the following please use the provided stylus (3) and proceed as descri-
bed:
Vincent
50
1. On the HOME page choose
MENU and touch SETTING. On
the SETTING page press ALIGN-
MENT.
2. Follow the instructions on screen
by touching the corner of the sym-
bols " " and "
3. If no input is made, the display
switches off and returns to the
HOME page after several
seconds without any changes
taking effect.
".