Meec tools 020688 Mode D'emploi page 34

EN
is to be done. Using the
power tool for anything
other than its intended
purpose can lead to
dangerous situations.
SERVICE
• Make sure that the power
tool is serviced by qualified
technicians that only use
identical spare parts. This will
ensure that the power tool
remains safe to use.
SAFETY INSTRUCTIONS FOR
ROUTERS AND PALM ROUTERS
• Hold the tool with the
insulated grips, if the
rotating tool comes in
contact with the power cord
the unprotected metal parts
will become live.
• Secure the workpiece on a
stable surface. Do not hold
the workpiece by hand or
with your body, you can
loose control which can
result in personal injury.
SYMBOLS
Read the instructions.
34
Approved in accordance with
the relevant directives.
Recycle discarded product
in accordance with local
regulations.
Safety class II
TECHNICAL DATA
Voltage
Rated output
Speed, no load
Speed control
Electronic speed control
Connection for dust extraction
Bit holder
Cutting depth
Weight
Safety class
Sound pressure level, LpA 96 dB(A), K=3 dB(A)
Sound power level, LwA* 107 dB(A), K=3 dB(A)
Vibration level, ah
*Guaranteed
Always wear ear protection!
The declared values for vibration and noise, which
have been measured according to a standardised
test method, can be used to compare different
tools with each other and for a preliminary
assessment of exposure. The measurement
values have been determined in accordance
with EN 62841-2-17:2017.
WARNING!
The actual vibration and noise level when
using tools may differ from the specified
maximum value, depending on how the
tool is used and the material. It is therefore
necessary to determine which safety
precautions are required to protect the user,
230 V ~ 50 Hz
1600 W
6000-26000 rpm
Yes
Yes
Yes
8,10,12 mm
50 mm
4 kg
II
7.07 m/s², K=1.5 m/s²