Meec tools 020688 Mode D'emploi page 31

SAFETY INSTRUCTIONS
Carefully read the instructions before use!
Save them for future reference.
WARNING!
Read all the safety instructions and other
instructions. Failure to follow the safety
instructions and other instructions can result
in electric shock, fire and/or serious personal
injury. The term "power tool" in the safety
instructions refers to your mains-powered
(corded) or battery-powered (cordless)
power tool.
SAFETY IN THE WORK AREA
• Keep the work area clean
and well lit. Dark and
cluttered work areas increase
the risk of accidents and
injuries.
• Do not use power tools in
explosive environments,
such as in the vicinity of
flammable liquids, gas or
dust. Power tools produce
sparks that can ignite dust
and fumes.
• Keep children and onlookers
at a safe distance when
working with a power tool.
• You can lose control of the
tool if you are distracted.
ELECTRICAL SAFETY
• The plug on the power tool
must match the power point.
Never modify the plug in any
way. Never use adapters with
earthed power tools. Intact
plugs and matching power
points reduce the risk of
electric shock.
• Avoid body contact with
earthed surfaces such as
pipes, radiators, cookers and
refrigerators. There is an
increased risk of electric
shock if your body is earthed.
• Do not expose power tools to
rain or moisture. There is a
greater risk of electric shock
if water gets into a power
tool.
• Be careful with the power
cord. Never use the power
cord to carry or pull the
power tool, or to pull out the
plug from the mains. Keep
the power cord away from
heat, oil, sharp edges and
moving parts. Damaged or
tangled power cords increase
the risk of electric shock.
• When you use a power tool
outdoors, use an extension
EN
31