Preparing A Beverage/Drink - FLAVIA Creation 150 Manuel D'utilisation

PREPARING A BEVERAGE/DRINK

BREWING BEVERAGES
1.
clockwise and insert your
chosen freshpack.
2
.
Close Pack Door by turning the
that some resistance may be felt
as the Pack Door is closed. This is
pack seal.
4
.
Press the drink
selection button
of your chosen
freshpack.
6
.
Pack Door and remove the used freshpack for
disposal.
Take care when removing the pack
immediately after the brewing process as it
will be HOT.
on steadily.
CAUTION:
Do not open the Pack Door, attempt to remove the pack or press drink selection buttons
before brewing is complete, this will interrupt the brewing process.
Pressing the drink selection button during brewing will interrupt the brewing process. The
Take care when removing the freshpack
Do not remove the Cold Tank from the product during brewing as this will reduce the
volume of the drink and subsequent drinks brewed.
3
.
Place a cup
centrally on the
push back until
it touches the
backstop.
5
.
When brewing is complete,
the indicator lights will
flash in an arrow pattern
to indicate that the used
freshpack should be removed.
8
Note:
operate Pack Door