Program Menu - Menuett 006783 Instructions D'utilisation

5
Clean the outside of the container and put the
container in the pressure cooker. Twist the container
from side to side to make sure it has contact with the
hot plate.
Caution! Make sure that the hot plate and the bottom
of the container are clean and free from objects,
- risk of overheating and/or malfunction.
6
Close the lid and the pressure relief valve. Refer to
"3.3 To close the lid" on page 29.
3.7.2 To start the product
1
Prepare the pressure cooker and the food. Refer to
"3.7.1 To prepare for cooking" on page 29.
2
Switch on the pressure cooker. If the button does not
operate correctly, make sure that the lid is properly
closed. Refer to "3.3 To close the lid" on page 29.
Note! When the pressure cooker is switched on it goes into
standby mode and (–) flashes in the display.
3
Push the menu button.
4
Use the +/-buttons to navigate and select the
required menu program. The corresponding program
is selected after 10 seconds and the pressure cooker
starts after another 10 seconds. The cooking is
finished when the following occurs:
● The status light for the menu program goes off.
● The status light for keep warm goes on.
● A sound is given.
Note! Different menu programs have different cooking times
and larger amounts of food require longer cooking times.
Refer to "3.8 Program menu" on page 30.
Note! The cooking can be stopped at any time with the keep
warm button/power switch. The pressure cooker goes into
standby mode.
Note! Do not let the product stay in keep warm mode for
more than 2 hours.

3.8 Program menu

1. Meat
2. Poultry
3. Vegetables
2022_001
4. Steam
5. Sauté
6. Slow cook
7. White rice
8. Brown rice
9. Beans
10. Broth
11. Curry
12. Soup
13. Multigrain
14. Congee
15. Chili
3.8.1 To use a program
1
Push the menu button.
2
Use the +/-buttons to navigate and select the
required menu program, P01–P15. The corresponding
program is selected after 10 seconds and the product
starts after another 10 seconds.
Note! The countdown in the display starts when the pres-
sure increases in the product.
Note! Push the power switch at any time to end a program.
3.8.2 To use a program with delayed start
1
Push the menu button.
2
Use the +/-buttons to navigate and select the
required menu program, P01–P15.
3
Push the delay timer button within 10 seconds after
you select a program. The status light Delay Timer
and the time flashes in the display.
4
Set the required time with the +/- buttons. Each push
on the buttons increases or decreases time with 10
minutes. After 10 seconds the total cooking time will
show on the display and the countdown starts.
3.8.3 To use the manual setting
1
Push the button for manual setting. The status lights
for Manual setting and High comes on. The display
shows the number 30.
2
Push the button for cooking time.
30