Simple Fault Analysis And Elimination (Varying With Different Products); Certifications (To Be Provided By Certification Engineer); Safe Recovery Instructions - ChiQ CPS570F Manuel D'opération

VIII. Simple fault analysis and elimination
With regard to the following small faults, not every failure needs to be fixed by the technical service personnel; you can try
to solve the problem.
Case
•
Completely
non-
refrigeration
•
Abnormal noise
•
Poor
refrigerating
efficiency
•
Peculiar smell in
refrigerator
•
No key
response
•
Temperature
setting
impossible
•
Freezer
temperature
displayed on the
panel, with the
temperature
digits flashing
( Note: If the above descriptions are inapplicable to troubleshooting, do not disassemble and repair it yourself.
Repairs carried out by inexperienced persons may cause injury or serious malfunctioning. Contact the local store where
your purchase was made. This product should be serviced by an authorized engineer and only genuine spare parts
should be used.
When the appliance is not in use for long periods, disconnect from the electricity supply, empty all foods and clean the
appliance, leaving the door ajar to prevent unpleasant smells.
IX. Certifications
Electrical information
This electrical appliance must be grounded
This product is equipped with a plug, which is suitable for all houses equipped with sockets meeting the current
specifications
If the fitted plug is not suitable for your socket outlets, it should be cut off and carefully disposed of. To avoid a possible
shock hazard, do not insert the discarded plug into a socket.
This product complies the EEC directives.
X.

Safe recovery instructions

Disposal
Old appliances still have some surplus value. An environmentally friendly approach will ensure that valuable raw materials
are recycled.
The refrigerants used in your equipment and insulation materials require special handling procedures. Make sure there is
no pipe damage on the back of the equipment before handling.
Up-to-date information on the options for disposing of old equipment and packaging from old equipment can be obtained
from the local municipal office.
Correct disposal of the product
Inspection
•Is power plug off?
•Are breakers and fuses broken?
•No electricity or line trip?
•Is refrigerator stable?
•Does refrigerator contact the wall?
•Do you put hot food or too much
food?
•Do you open the door frequently?
•Do you clip food bag to the door
gasket?
•Direct sunlight or near a furnace or
stove?
•Is it well-ventilated?
•Temperature setting in too high?
•Any spoiled food?
•Do you need to clean refrigerator?
•Have you packed food of strong
flavors?
• Check whether the Child Lock
function is enabled on the display
panel.
•Check whether the Smart or Fast
Freeze function is enabled on the
display panel.
•Is power cut before?
•Re-plug
•Opening the door and checking whether the lamp is
lit.
•Adjusting refrigerator's leveling feet.
•Off the wall.
•Putting food into refrigerator when hot food becomes
cool.
•Checking and closing the door.
•Removing the refrigerator from the heat source.
•Emptying the distance to maintain good ventilation.。
•Setting at the appropriate temperature.
•Throwing away spoiled food.
•Cleaning refrigerator.
•Packing food of strong flavors.
•Press & hold the "Unlock" key for 3 seconds to unlock
the key, and then conduct the key operation. (For
details, refer to the Child Key function.)
•Exit the special function mode, and then set up the
temperature (for details refer to the Functions section)
• Press any key to lift the alarm (refer to the
Overtemperature alarm function), and then check the
foods inside the fridge and freezer compartments get
spoiled.
12
Solutions
EN