Setup; Sd Card Installation; Battery Installation - Levana Keera Manuel

SETUP

LET'S GET STARTED!

SD Card Installation

1. Gently remove the BATTERY COMPARTMENT COVER on the
back of the monitor by sliding down.
2. Slide the silver bracket to the right to unlock the MicroSD card
holder. Remove the MicroSD card from the SD card adapter and
insert the MicroSD card in the bracket as shown - slide the silver
bracket to the left to lock the MicroSD card into place.

Battery Installation

1. Gently remove the BATTERY COMPARTMENT COVER on the back
of the monitor by sliding down.
2. Insert the battery; the battery connectors on the battery should
line up with the connectors inside the battery compartment.
3. Slide the BATTERY COMPARTMENT COVER back into place.
4. For extended periods of non-use, please remove battery from
baby monitor.
mylevana.com
1
**PLEASE NOTE**
The monitor can
support a Micro SD card
UP TO 32GB.
1
2
10
2
3