Cleaning - Maintenance - Repair; Danger - Hydrotechnik MultiEPC Série Mode D'emploi

Display Extreme Values
Press or shortly to display the measured maximal or minimal value of the
pressure development. Press or long to delete the maximal or minimal
value. Press to switch the device back into measuring mode.
Display Pressure Unit
Press to display the programmed pressure unit After appr. four seconds, the
measuring value will be displayed, again.
Cleaning – Maintenance – Repair

Danger!

Never open the casing! Improper repair and modifi cations of any kind may lead
to measuring faults and malfunctions. Uncontrolled reactions of subsequent
parts of the installations with severe injuries and heavy damage could be the
E
consequences.
Clean the casing of the Multi-EPC using a soft, clean and dampened cloth.
Heavy dirt can be removed using a mild household detergent.
Caution!
Do not use aggressive detergents! This could damage the device, lead to color
changes or dull the pane of the display.
Calibration
The device is a high-precision measuring device that need regular calibration.
We recommend an annual calibration by our calibration lab. Please contact
our service staff.
Customer Service
Before contacting our service staff, you should note the TKZ number (see type
plate at the rearside of the device), a description of the fault, and the program-
ming of the device (function, thresholds, delay time).
The adress of our customer service is contained on the back page of this
manual.
30 www.hydrotechnik.com