Hydrotechnik MultiEPC Série Mode D'emploi page 28

Hysterese: Func = HYS
Delay time:
Hysterese Function „Delay"
Thresholds:
Closer:
E
Hysterese:
Delay time:
Window Function „Closer"
Thresholds:
Closer:
Window:
Delay time:
28
dSP1 = 00.00 / drS1 = 00.00
SP1 = 250 / rSP1 = 200
Conf = noPn
Func = HYS
dSP1 = 00.10 / drS1 = 00.10
SP1 = 250 / rSP1 = 200
Conf = noPn
Func = FEn
dSP1 = 00.00 / drS1 = 00.00
When reaching the upper threshold
SP1, the output contact switches
after a delay of 100 ms to „clo-
sing". If pressure falls short of the
lower threshold rSP1, the output
contact opens after a delay of 100
ms again.
The output contact is closed when
the pressure is between the two
thresholds. This is valid for increa-
sing and decreasing pressure.
www.hydrotechnik.com