Mechanical Connection Hole; Programming - Hydrotechnik MultiEPC Série Mode D'emploi

®
DESINA Connection M12x1
Diagnosis has to be realized implicitely. An output current < 3,9 mA means
E
wire breakage or failure, > 21 mA indicates an internal error. Light diode II
lights in both cases.

Mechanical Connection Hole

Screw hole in acc. to DIN 3582, part 2,
form X (sealing by elastomere ring)

Programming

24
Controls and Indicators
1 4-digit display
2 Light diode for switch output 2 /
supervision DESINA
3 Key „up / more"
4 Light diode for switch output 1
5 Key „down / less"
6 Key „OK"
®
www.hydrotechnik.com