Home Skinovations Silk'n Pro AS104779A Mode D'emploi page 17

10. Maintenance of Silk'n Pro™
10.1. Cleaning Silk'n Pro™
After each hair removal session, it is recommended to clean your Silk'n Pro™ device, and especially the
TREATMENT SURFACE.
Unplug Silk'n Pro™ before cleaning.
Use a dry, clean cloth and a specially formulated cleaner for electronic equipment to gently wipe Silk'n
Pro™ surface, and especially the TREATMENT SURFACE.
Never immerse Silk'n Pro™ or any of its parts in water!
10.2. Replacing the LAMP CARTRIDGE
The Silk'n Pro™ DISPOSABLE LAMP CARTRIDGE can fire a pre-set and limited number of light pulses. Pulse
intensity is determined only according to the energy level setting of the device. There is no decrease of energy
during the usable lifetime of the LAMP CARTRIDGE.
When only 100 light pulses remain in the DISPOSABLE LAMP CARTRIDGE, the REPLACE CARTRIDGE
INDICATOR LIGHT on the CONTROL PANEL will start blinking, indicating that the DISPOSABLE LAMP
CARTRIDGE should soon be replaced. As the number of light pulses in the DISPOSABLE LAMP CARTRIDGE
further decreases, the REPLACE CARTRIDGE INDICATOR LIGHT blinking will grow faster. Once all the
pulses in a DISPOSABLE LAMP CARTRIDGE have been used, the REPLACE CARTRIDGE INDICATOR
LIGHT will remain steadily on, indicating that further pulses cannot be emitted. In order to continue the hair
removal session, it will now be necessary to replace the DISPOSABLE LAMP CARTRIDGE.
Note: A DISPOSABLE LAMP CARTRIDGE should also be replaced if large spots
appear inside it or if its TREATMENT SURFACE is broken.
To replace a DISPOSABLE LAMP CARTRIDGE:
1. Press the ON/STBY SWITCH to turn Silk'n Pro™ to STBY mode.
2. Unplug the power adaptor from the electrical outlet.
3. Grasp the used DISPOSABLE LAMP CARTRIDGE on both sides, pull it out
of the socket and discard with normal trash.
4. Unwrap a new DISPOSABLE LAMP CARTRIDGE.
5. Push the new DISPOSABLE LAMP CARTRIDGE gently into place.
If correctly installed, the DISPOSABLE LAMP CARTRIDGE will spring back
when pushed in and released.
16
All manuals and user guides at all-guides.com