Sauder 410367 Mode D'emploi page 19

Step 14
Slide a SHELF MOLDING* (N) onto the notched edge of each ADJUSTABLE SHELF (J).
å
Push the RUBBER SLEEVES (2R) over the METAL PINS (1R). Insert the METAL PINS (1R) into the hole locations of your
å
choice in the ENDS (A3, B3, C2, and D2). Set the ADJUSTABLE SHELVES (J) onto the METAL PINS.
Using your hammer, gently tap a CAM COVER (13P) onto each visible HIDDEN CAM.
å
* U.S. Patent No. 5,499,886
å
NOTE: Please read the back pages of the instruction booklet for important safety information.
å
This completes assembly. Clean with a damp cloth. Wipe dry.
å
J
B3
J
D2
J
1R
(12 used)
2R
Notched edge
A3
C2
13P
(8 used)
To cover HIDDEN CAMS
x3
J
The large groove is
closer to this edge.
N
Page 19