Switching Off The Fridge; Temperature Regulation - AEG SCT71800S1 Notice D'utilisation

www.aeg.com
6
Alarm indicator
9
Child Lock function
10
Minute Minder function
11
DYNAMICAIR function
12
2.2 Switching on
To switch on the appliance do these
steps:
1. Connect the mains plug to the pow-
er socket.
2. Press the appliance ON/OFF button
if the display is off.
3. The alarm buzzer could operate af-
ter few seconds.
To reset the alarm refer to "High
temperature alarm".
4. If "dEMo" appears on the display,
the appliance is in demonstration
mode. Refer to "WHAT TO DO IF..."
paragraph.
5. The temperature indicators show the
set default temperature.
To select a different set temperature re-
fer to "Temperature regulation".
2.3 Switching off
To switch off the appliance do these
steps:
1.
Press the appliance ON/OFF button
for 5 seconds.
2. The display switches off.
3. To disconnect the appliance from
the power disconnect the mains
plug from the power socket.

2.4 Switching off the fridge

To switch off the fridge:
1. Press the Mode button until the cor-
responding icon appears.
The fridge Off indicator and the
fridge compartment indicator flash.
The fridge temperature indicator
shows dashes.
2. Press the OK button to confirm.
3. The fridge Off indicator is shown.
2.5 Switching on the fridge
To switch on the fridge:
1. Press the fridge temperature regula-
tor.
Or:
1. Press the Mode button until the cor-
responding icon appears.
The Fridge Off indicator flashes.
2. Press the OK button to confirm.
3. The fridge Off indicator goes off.
To select a different set temperature re-
fer to "Temperature regulation".

2.6 Temperature regulation

The set temperature of the fridge and of
the freezer may be adjusted by pressing
the temperature regulators.
Set default temperature:
• +5°C for the fridge
• -18°C for the freezer
The appliance activates a function mode
that permit to optimize the food preser-
vation and energy consumption.
Such a function guarantees the maxi-
mum silentness during the performance
of the appliance.
The temperature indicators show the set
temperature.
The set temperature will be reached
within 24 hours.
After a power failure the set tem-
perature remains stored.
2.7 Minute Minder function
The Minute Minder function is to be
used to set an acoustic alarm at the pre-
ferred time, useful for example when a
recipe requires to cool down a mixture
for a certain length of time, or when a re-
minder is needed in order not to forget
the bottles placed in the freezer for fast
cooling.
To switch on the function:
1. Press the Mode button until the cor-
responding icon appears.
The Minute Minder indicator flashes.
The Timer shows the set value (30
minutes) for a few seconds.
2. Press the Timer regulator button to
change the Timer set value from 1 to
90 minutes.
3. Press the OK button to confirm.
The Minute Minder indicator is
shown.