Pre-Installation - Ketra N3 Guide D'installation

Pre-Installation

Turn OFF electrical power to all circuit breakers feeding into the panel before installing
or servicing this product.
Improper use or installation can cause SERIOUS INJURY, DEATH, OR LOSS/DAMAGE
OF PROPERTY.
This device should be protected by a 20 A circuit breaker.
This device includes a two-way radio. For optimal performance and signal integrity:
Do not install in third-party metal enclosures
•
• Use non-metal enclosures (e.g. plastic, fiberglass or PVC)
Product is plenum-rated for non-air-handling spaces.
Product is direct-insulation contact rated.
If placed in enclosure alongside other electrical components, take necessary precautions regarding
operating temperatures.
Product is UL surface-mount listed. Does not require a dedicated enclosure.
This product contains both class 1 and class 2 electrical connections. The sections are physically
separated by a barrier. MAINTAIN PHYSICAL SEPARATION BOTH INSIDE AND OUTSIDE OF DEVICE IN
ACCORDANCE WITH ELECTRICAL CODES.
This device must be installed by a licensed electrician in accordance with all national and local codes.
P/N 3662351 Rev B
© 2019 Ketra, Inc. All rights reserved. 5 | N3 INSTALLATION GUIDE