Physical Mounting - Ketra N3 Guide D'installation

I N S TA L L AT I O N I N S TA L L AT I O N

Physical Mounting

Remove the lid. Note that screws are captive and need not be fully removed from lid (see fig. 4).
1.
2. Remove plastic plugs from knock-outs as required (see fig. 5).
3. Mount box to surface with appropriate fasteners. Note: inner diameter of hole is 3/16 in (4.76 mm)
(see fig. 6).
fig. 4
Mounting Holes
3/16 in (4.76 mm) hole
fig. 6
8 | N3 INSTALLATION GUIDE
Screws
Main Cover
fig. 5
Conduit Plugs
P/N 3662351 Rev B
© 2019 Ketra, Inc. All rights reserved.