Publicité
Les langues disponibles
Les langues disponibles
ULTRAFLEX
EXAMPLE OF HYDRAULIC CONNECTION OF THE UH32-F SINGLE STATION
WITH SINGLE CYLINDER
9
7
L
R
7
MASTER
HELM
WARNING: Check the correct connection of the Kit OB-MD (8) between the helm and the power unit; the hose coming from fitting
"T" on the helm must be connected to fitting "T" on the power unit and the hose coming from fitting "P" on the helm must be connected
to fitting "P" on the power unit.
WARNING: Check the correct connection of the Kit OB-SVS (7) between the helm and the cylinder; the hose coming from fitting "R"
on the helm must be connected to the cylinder "PORT" side fitting and viceversa.
WARNING: Since the section between the helm and the cylinder may be subject to pressure up to 105 bar (1500 PSI) use SVS
cylinders and hoses.
NOTICE: In case of use with inboard cylinders, follow the indications in the corresponding use and maintenance manuals for the
hydraulic hose connection.
page 18
of 143-
POWER ASSISTED STEERING SYSTEM
10
11
12
13
Installation, Maintenance and Owner's Manual
1
5
6
8
8
2
3
4
Publicité
