Publicité
Les langues disponibles
Les langues disponibles
ULTRAFLEX
Installation, Maintenance and Owner's Manual
2.2.2 Dual station packaging contents
STANDARD PACKAGING CONTENTS:
MD KIT - FRONT MOUNT APPLICATION:
n° 1 helm (with the same cylinder capacity as the Master helm; UHD32-F or UHD40-F or UHD50-F according
to the Master helm)
n° 2 flanges for fixing to the dashboard
n° 4 screws for fixing to the dashboard
n° 4 spacers (not supplied for 50cc helms)
n° 8 washers
n° 4 self-locking nuts
n° 1 plastic cover
n° 4 screws for cover fixing
n° 1 key for steering wheel fixing
n° 1 stainless steel washer for steering wheel fixing
n° 1 stainless steel self-locking nut for steering wheel
fixing
n° 1 helm shaft seal
n° 1 dashboard seal
n° 1 user interface
n° 4 stainless steel nuts for fixing to the dashboard
n° 4 stainless steel washers
n° 1 seal
MD KIT - TILT APPLICATION:
n° 1 helm (with the same cylinder capacity as the Master helm: UHD32-T or UHD40-T or UHD50-T according to the
Master helm)
n° 1 litre of hydraulic oil OL 150 ULTRAFLEX
n° 1 Slave helm communication cable
n° 1 straight fitting
n° 2 "T" fitting
ORDER SEPARATELY:
n° 1 OB-MD kit whose length corresponds to the distance between the Master helm and the Slave helm
n° 2 Kit OB-SVS
NOTICE: cylinders and hydraulic hoses (OB-SVS kit and OB-MD kit) are ordered and packed separately
(see the relevant installation manuals).
NOTICE: The Slave helm is identified by a PVC disc to be removed during installation only.
DANGER
NEVER use the Slave helm as single station since it is not equipped with proper safety systems. Refer to the
installation diagram!
A wrong installation will prevent the system from operating properly!
page 16
of 143-
POWER ASSISTED STEERING SYSTEM
Publicité
