Publicité
Les langues disponibles
Les langues disponibles
English
Operation without WLAN connection
1. Insert the switching power supply unit in the mains socket.
2. Actuate the touch field.
The feed drum will rotate 1x and then again automatically at the same time every 24 hours.
If the touch field is actuated for a second time within a minute, 2 feedings will then be given at the same time
every 24 hours.
To delete the programmed time and number of rotations, place your finger on the touch field for longer than
approx. 10 seconds until the status LED illuminates in all the colours of the rainbow.
Maintenance
DANGER! Electric shock!
▶ Before all maintenance work, remove the switching power supply unit of the automatic feeder.
CAUTION! Material damage.
▶ Do not use hard objects or aggressive cleaning agents for cleaning.
The following sections describe maintenance work necessary for optimum and fault-free operation. Regular main-
tenance prolongs the service life and assures functionality of the through-flow filter over a long period.
Cleaning
1. Remove the switching power supply unit from the mains socket.
2. Remove the automatic feeder from the aquarium.
3. Remove the drum unit from the drive unit.
4. Remove the cover from the feed drum.
5. Clean the cover and feed drum under running water.
6. Clean the drive unit with a soft, dry cloth.
7. Install the automatic feeder in reverse order.
26
Publicité
