Install Filters; Complete Installation - Whirlpool JENN-AIR JXI5036WS Instructions D'installation Et Guide D'utilisation Et D'entretien

6. Slide the upper duct covers to the ceiling and secure to the
upper horizontal support with 2 - 3 x 6 mm screws.
D
A 3 x 6 mm Screws (2)
B. Slotted holes (2)
C. Upper chimney covers (assembled)
D. Ceiling
7. Secure the lower duct covers together at the top using 2
plastic clips. Use one on each side.
A
A. Plastic clips (2)
B. Lower duct covers top clip area
10
A
B
C
B

Install Filters

For non-vented (recirculating installations):
1. Install optional charcoal filter, wrapping it around the grease
filter.
2. Place the charcoal filter mat around the grease filter and fix it
in place by using the cap lock springs provided.
3. Position the upper cap and fix it in place using the cap lock
spring provided.
A. Charcoal filter mat
B. Grease filter
C. Charcoal filter side
lock springs
For all installations:
4. Install the grease filter. See "Range Hood Care" section.

Complete Installation

Check the operation of the range hood blower and light. See the
"Range Hood Use" section.
If range hood does not operate, check to see whether a circuit
breaker has tripped or a household fuse has blown.
NOTE: To get the most efficient use from your new range hood,
read the "Range Hood Use" section.
D. Upper cap
E. Cap lock spring
F. Grease filter support