Publicité
Les langues disponibles
Les langues disponibles
OEM Manual – CUBO
Mask
Topic
Description
index
controller and PSD (Inverter for
compressor BLDC)
Power+ inverter alarm.
Generic Alarm of the PSD (LT/MT
ALW25
compressor). More details about
the alarm code of the inverter is
reported in the same mask.
Compressor start failure.
Delta Pressure between suction and
ALW26
discharge does not increase after
the compressor start
Envelope alarm.
Compressor is working out of
ALW27
admitted envelope. The current
operating zone is reported in the
same mask
High discharge gas temperature.
Discharge temperature measured
ALW28
by the probe is higher than the
Alarm threshold set on mask Hb02
Compressor Low pressure
differential (insufficient lubrication).
ALW29
Low delta pressure between suction
pressure and discharge pressure
Inverter model not compatible
(Power+ only allowed).
ALW30
The inverter model is not
compatible with the compressor
size configured on mask Cag12
ALW40-
Store number: !! OFFLINE !!
53-66-
79-92
ALW41-
Store number: Low temperature
54-67-
alarm [Generic Probe 1]
80-93
ALW42-
Store number: High temperature
55-68-
alarm [Generic Probe 1]
81-94
ALW43-
Store number: Low temperature
56-69-
alarm [Generic Probe 2]
82-95
ALW44-
Store number: High temperature
57-70-
alarm [Generic Probe 2]
83-96
ALW45-
Store number: Defrost timeout
58-71-
84-97
ALW46-
Store number: Low superheat
59-72-
alarm
85-98
ALW47-
Store number: Low suction
60-73-
temp.alarm
86-99
UMT/WG T MT Rev3.0 – 08/10/2021
AQUA
2
Serious
alarm
x
x
x
Normal
Action
alarm
x
Shut Off compressor
Compressor shut off.
Compressor restarts after a
delay if this alrm does not
occur more than 5 times in
60 minutes
x
Shut Off compressor
Shut Off compressor
x
No Action
x
Compressor does not start
-
Not present
x
Display only (refer to
MPXPRO / Ultracella user
manual)
x
Display only (refer to
MPXPRO / Ultracella user
manual)
x
Display only (refer to
MPXPRO / Ultracella user
manual)
x
Display only (refer to
MPXPRO / Ultracella user
manual)
x
Display only (refer to
MPXPRO / Ultracella user
manual)
x
Display only (refer to
MPXPRO / Ultracella user
manual)
x
Display only (refer to
MPXPRO / Ultracella user
manual)
EN
Delay
Reset
No delay
Automatic
Automatic/
manual (if
Settable
it occurs
by mask
more than
Cag51
5 times in
60
minutes)
Settable
by mask
Automatic
Cag55
No delay
Automatic
Settable
by mask
Automatic
mask
Cag55
No delay
Automatic
Pag. 29-EN
Publicité
