Fracarro SIG7720 Instructions D'emploi page 38

8. Re-enter the PROGRAM LIST menu to "send" the video/audio program to the chosen multicast
group according to the following indications:
a. To activate the program in Multicasting transmission, select the "send" control (the program status
will turn from "send" into "stop" and the bit/rate associated to the program will change from 0Kbit/s
to the typical bit/rate value associated to the program – see the following image):
b. Couple the program to the selected Multicast group by choosing one of the two following methods:
i. selecting the drop-down menu in column Multicast;
ii. selecting from "Properties" column the "Modify" button for select IP Multicast group (by default,
all programs are associated to the same Multicast group – Group 1);
After setting all parameters, confirm them with the SAVE control.
38
c
d
9
N