Presentation; Description - Chauvin Arnoux F 03 Notice De Fonctionnement

1. PRESENTATION

Reliability and simplicity are the key features of the F03
multimeter clamp for use by electricity professionals:
A compact instrument integrating a current sensor for
measuring intensity without switching off the power to the
circuit to be checked.
Exceptional ergonomic design which includes:
- automatic or manual selection of the type of signal to be
measured, direct or alternating,
- automatic selection of the measurement calibration,
- programmable buzzer warning when voltage is present: V-
Live,
- buzzer warning when the measurement range is exceeded,
- backlit digital display
- system to shut the instrument down automatically.
- MIN - MAX - PEAK value recording function,
- correction of measurement drift for direct current (zero DC)
- automatic offset of measurement lead resistance (zero Ω).
Compliance with IEC electrical safety standards and EC
marking
Light and robust for on and off-site use.

2. DESCRIPTION

(see diagram in § 8 Appendix)
Jaws
5-way selector switch:
OFF The clamp is switched off, it is switched on when
one of the other functions is selected
V Measurement of direct and alternating voltage
(RMS value)
Measurement of continuity, and, with the yellow key,
resistance and semi-conductor tests
A Measurement of direct and alternating current
(RMS value)
T° Measurement of the clamp's internal or external
temperature, according to the presence or absence
of a sensor, in °C or °F.
Control keys
3 types of action are possible with these keys:
Short press
< 1.3 s, it is valid as soon as key activation is detected.
Long press
> 1.3 s, this enables the user to enter a measurement or
operating mode. Holding the key down or releasing it does
not have any effect.
23