AYA AFD2103XAQUA Manuel D'utilisation page 57

Firstly tilt the left side of the door shelf,and make sure
the notch has been fastened to the door.Then press
the right side inwardly,push it down to the right place.
Remove the water storage box part
Pull out the water storage box toward thirty degrees
above the horizontal plane.
Install the water storage box part
Put the dispenser part into the hole of the door. Align
the door liner, then press in the water storage box
toward thirty degrees below the horizontal plane.
Pour water into the storage box part
Firstly, turn the cover of storage box anticlockwise and
pull out the cover.Secondly , pour water into storage
box, watching out the limit line.Lastly, covering the
cover.
Obtain the cooling water
Pressing the impact pole , cooling water will flow into
your cup. And you can enjoy your cooling drink.
Please only add pure water into the tank！
11