Kreg KPHA750 Manuel page 2

Table of Contents
Safety Precautions . . . . . . . . . . . . . 2
Pre-Assembly . . . . . . . . . . . . . . . . 3
Recommended Tools (Not Included) . . . 3
Product Description . . . . . . . . . . . 3
Assembly: For 500-Series Jig . . . . . . . 4
Assembly: For 700-Series Jig . . . . . . . 7
Assembly: Adjustable Stop . . . . . . . . . 10
Safety Precautions
Before using a power tool with this product, read and follow the tool manufacturer's
WARNING
instructions and safety precautions in addition to the safety precautions below to reduce the risk
of serious injury from hazards such as fire, electric shock, or rotating drill bit.
■
Always wear personal protective equipment recommended by the manufacturer of the power
tool you are using, such as eye, hearing, or respiratory protection.
■
The drill bit is sharp. Handle with care.
■
Do not allow familiarity gained from frequent use of your tools to replace safe work practices.
A moment of carelessness is sufficient to cause serious injury.
■
Avoid awkward hand positions where a sudden slip could cause contact with the rotating bit.
■
When drilling, always ensure workpiece is clamped securely. It is dangerous to hold workpiece
in place by hand.
Do not operate this tool or any machinery while under the influence of drugs, alcohol,
WARNING
or medications.
This product can expose you to chemicals including Acrylonitrile and other chemicals,
WARNING
which are known to the State of California to cause cancer and reproductive harm. For more
information go to www.P65Warnings.ca.gov.
2
Operation - Folding the Material Support
Wings . . . . . . . . . . . . . . . . . . . . 12
Operation - Using the Adjustable Stop . . 13
Removing the Jig from the
Docking Station . . . . . . . . . . . . . . . 15
Care and Cleaning . . . . . . . . . . . . . 16