Publicité
Les langues disponibles
Les langues disponibles
Accessories
Rotational speed display for service and operation.
You can connect an external display on the terminal block X4 to display
the actual rotational speed.
Order no.: E80103
Technical Data
Nominal voltage
Inputs
Output
Display
Logic
Accuracy
Housing
Connection
Operating temperature
From 12V DC or 24V DC on-board system with
diesel generator set running
power supply 12V/24V DC
via 3 screw terminals;
(without load-dump protection)
pulses proportional to the rotational speed from a
including connection terminals for sensor supply
1 floating changeover contact,current rating 8 A
green LED : operating voltage
yellow LED : input pulses
green LED : relay status
2 red LEDs : programming
microcontroller with EEPROM,
programmed in Assembler
approx. 1% of programmed rotational
insulating material with transparent cover,
approx. 130 x 94mm base, approx. 60mm high
with 3 cable glands PG 11; protection rating IP 65
screw terminals up to 4mm
proximity switch;
speed value
-20°C ... +60°C
2
on PCB
Publicité
