turbionaire Smart 10 Eco Mode D'emploi page 8

EN
Drainage manually
When the water tank is full (the water level indicator in the reservoir can be visually viewed at any
time), until it is drained, the unit will stop running under the action of the float in the tank, a beep
will sound 10 times briefly, and the message "FL" and the red red tank LED full will be displayed.
Remove the water tank from the device and empty it from the water. Reinstall the water drain tank
and the dehumidifier will restart. Install the water tank as instructed in the following figures.
NOTE: Note: Before inserting the water tank, make sure that the float at the top of the tank is mobile
(avoid being blocked)..
DRAINAGE