Locinox SlimStone-X Manuel page 12

7.2 MANAGE PIN CODE [1]
• Access programming mode (see 7. 1 )
A maximum of 400 different PIN codes can be
programmed (4-8 digits)
EN
• Press [1] and confirm with [#]
• [1] and [#] are both lit
• Enter a new PIN code and confirm with [#]
• In case of a new code, the code will need to be
repeated and confirmed with [#]
• The lights below button [1] and [2] are indicating
which relays are selected
• Press [1] or [2] to select (permanently on) or de-
select (flashing) the corresponding relay
• Press [#] to confirm
• You will return to the main menu of the
programming mode
When two different codes or a wrong code
length is entered, all keys will flash three times,
indicating the code setting hasn't been saved.
Try again. [1] will remain lit.
A code can be removed by de-selecting [1]
and [2] before confirmation
7.3 SET HOLD TIME RELAY 1 [3]
• Access programming mode (see 7. 1 )
• Press [3] and confirm with [#]
• [3] and [#] are both lit
• Choose the desired switching duration:
— a value between 1 and 98 for a timed relay
(= relay remains active for the chosen number
of seconds)
— '0' for pulse mode (= the relay is activated for
500 ms)
— '99' for bistable mode (= the relay remains
activated until another code is entered)
• Enter a value between 0 and 99, and confirm with
[#]. When all leds flash, your choice is saved.
• You will return to the main menu
In case an invalid time is entered, all keys will
flash three times. Menu [3] remains activated.
The default time is set to 8 seconds
12
7.4 SET HOLD TIME RELAY 2 [4]
• Access programming mode (see 7. 1 )
• Press [4] and confirm with [#]
• [4] and [#] are both lit
• Choose the desired switching duration:
— a value between 1 and 98 for a timed relay
(= relay remains active for the chosen number
of seconds)
— '0' for pulse mode (= the relay is activated for
500 ms)
— '99' for bistable mode (= the relay remains
activated until another code is entered)
• Enter a value between 0 and 99, and confirm with
[#]. When all leds flash, your choice is saved.
• You will return to the main menu
In case an invalid time is entered, all keys will
flash three times. Menu [4] remains activated.
The default time is set to 8 seconds
7.5 SET LIGHTING MODE [5]
• Access programming mode (see 7. 1 )
• Press [5] and confirm with [#]
• [5] and [#] are both lit
• Choose the desired lighting mode:
[1] Always on
[2] Auto-dim (default):
The brightness of the lighting is dimmed to
20% after 45 seconds inactivity. As soon as
a key is pressed, the lighting will be back at
full brightness for 45 seconds minimum.
[3] Auto-off:
The lighting is switched off after 45 seconds
inactivity. As soon as a key is pressed, the
lighting is back on for 45 seconds minimum.
• Press [1], [2] or [3] and confirm with [#]. When all
leds flash, your choice is saved.
• You will return to the main menu
In case an invalid number is entered, all lights
flash three times. Try again. Menu [5] remains
activated.
SlimStone-X