Table des Matières
Publicité
In-Vehicle/In-Building
Installing a Wilson External Adapter
An external adapter is required to connect the cell phone or cellular data card to the Signal
Booster. The external adapter is cell phone/data card-specific and may be purchased
through a local retailer .
Sample
external
adapter
The external adapter plugs into the included six-foot extension cable and directly into a
socket on the cell phone or cellular data card as shown in Figure 1 . (NOTE: See the user's
manual for your specific phone or data card to determine the socket location.)
Run the extension cable from the external adapter on the cell phone or cellular data card
and attach it to the connector labeled "Inside Antenna" on the Signal Booster .
NOTE: Depending on your
specific cell phone, the adapter
socket may be located beneath a
rubber plug.
Figure 1
5
Contact Wilson Electronics Tech Support with any questions at 866-294-1660
Or email: tech@wilsonelectronics.com
Refer to Wilson's Adapter Guide to identify
the right adapter for your cell phone or
cellular data card . The adapter guide is
available through a local retailer or visit
www.WilsonElectronics.com.
Hours: 7am to 6pm MST.
Publicité
Table des Matières
