Outside Antenna; Signal Booster - Wilson Signal Boosters Manuel D'installation

Table des Matières

Publicité

In-Vehicle
Installing a Wilson Signal Booster
!
Warning: Do not plug in the DC Power
Supply until the Outside Antenna and
external adapter cables are attached to
the Signal Booster .
Contact Wilson Electronics Tech Support with any questions at 866-294-1660
Or email: tech@wilsonelectronics.com
Select a location to install the Signal
Booster that is away from excessive heat,
direct sunlight, moisture and that has proper
ventilation .
Recommended installation locations for
in-vehicle are:
• Under the seat
• In the trunk
• Under the dash
Run the cable from the outside antenna and
attach it to the connector labeled "Outside
Antenna" on the Signal Booster .
DC Power
Supply
Adapter
Hours: 7am to 6pm MST.
Outside
Antenna
Cell Phone

Signal Booster

4

Publicité

Table des Matières
loading

Table des Matières