ProMed EMT-4 Instructions D'utilisation page 67

manual_emt-4_270607 27.06.2007
T
ROUBLESHOOTING
If the Promed EMT-4 is not functioning correctly
1. Make sure that the batteries are correctly inserted, or replace
the batteries. When replacing the batteries, make sure that
the polarity is correct.
2. If the display is showing all functions but you can not feel
any stimulation, check that the electrode cables are properly
connected and the electrodes are correctly positioned. If the
unit seems to be working, but you feel no stimulation, it is
possible that the electrode cables or the electrodes have to
be replaced.
3. If the unit seems to be working, but you still feel no stimulati-
on, increase the current intensity as described above.
4. If you still can't feel any stimulation, the electrodes or electrode
cables may have to be replaced.
14:44 Uhr Seite 67
S M
ERVICE AND AINTENANCE
Should you encounter further problems, please contact your
dealer or return the unit to your dealer. Do not attempt to repair
a faulty unit yourself.
For repair or maintenance send the
wing address via your specialist dealer:
Promed GmbH
Service Department
Lindenweg 11, D-82490 Farchant
Tel. +49 (0) 8821 96 21-19, Fax +49 (0) 8821 96 21 21
67
to the follo-
Promed EMT-4
D
US
E
F
I