INTERNAL LAYOUT
FRESHSELECT
FRESHSELECT
The FreshSelect
EN
on each side. Release the thumbscrews to remove the drawer.
To remove the inner drawer unscrew and remove its thumbscrews.
When replacing the drawer, make certain the back of the drawer
engages under the clips on the slide guides. Once the drawer is
properly in position, reinstall the thumb screws as they are necessary
to keep the drawer in place.
WINE SHELF
WINE SHELF
The shelves can be easily removed for cleaning.
To completely extract a shelf:
1) Remove the bottles from shelf,
2) Slide out until it stops,
3) Tilt it upward until the wheels are free of their seat,
4) Lift and remove the shelf.
Installation is the reverse process.
LIGHTING
LIGHTING
Lighting is provided using LED strips and spots to completely illuminate the interior.
Depending on the model, side lamps may be on the left or right interior walls.
Once activated, the upper compartment lights will remain on even when the door is closed.
The lights can be turned off manually, or they will shut off after 6 hours.
In case of malfunction or failure of the lighting system, contact Hestan for service.
24
©2021 Hestan Commercial Corporation
LOW-TEMP DRAWER (KRW MODEL)
LOW-TEMP DRAWER (KRW MODEL)
™
™
™
™
drawer is held to the slide guides by a thumbscrew
KRW Lighting
KWC Lighting