MAXXMEE 6607.748.400 Mode D'emploi page 17

Compressor Ice Cream Machine
than 60% full so that it does not
overflow during operation! The cool-
ing process will increase the volume
of the ingredients.
3. Place on the lid (3) and twist it clock-
wise to secure it.
4. Insert the closure (4) in the filler
opening.
5. Fully unwind the connecting cable
and plug the mains plug into a plug
socket.
The device switches to stand-by mode
and the display (7) is activated.
6. Press the On / Off button (8) to
switch on the device.
After it is switched on, the "Ice
cream" function with a preparation
time of 60 minutes is preset. The sym-
bol and 60:00 flash on the display.
7. If the ingredients are only going to be
cooled or stirred, keep pressing the
Menu button (9) until the symbol
for the function you want appears:
for cooling,
L
It is not possible to switch
between the functions later on
while the device is operating. The
device must first be switched off
using the
8. The knob (11) can be used to change
the preparation time (5 – 60 minutes)
– even while the device is operating.
It generally takes approx. 60 minutes
to make ice cream, approx. 25 min-
utes to make sorbet and approx. 30 to
40 minutes to make frozen yoghurt.
9. Once all settings have been made,
start processing by pressing the
Start / Pause button (10) (Picture D).
The remaining preparation time is
shown on the display.
L
More ingredients can be added
through the filler opening during
processing (Picture E).
for stirring.
On / Off button.
10. To pause the processing, press the
Start / Pause button again. Please
Note: After pausing for 10 minutes,
the device switches to stand-by
mode.
When trying out new recipes, we rec-
ommend testing the consistency of the
ice cream mixture from time to time and
reducing or increasing the preparation
time as required.
L
When the mixture becomes too
solid, the stirrer insert stops so
that the motor is not overloaded.
The device switches off once the set
preparation time has elapsed.
If the ingredients have only been stirred
or cooled, the device automatically
switches to stand-by mode. However,
when the "Ice cream" function ends, the
On / Off button must also be pressed.
Otherwise the device begins to cool after
10 minutes (see below).
Automatic Cooling Following the
"Ice Cream" Function
When the "Ice cream" function ends, the
device remains activated (the display is lit)
and starts to cool automatically after 10
minutes. In the meantime, COOL flashes
on the display. After another 10 minutes,
this cooling is ended and the device
switches to stand-by mode.
EN
17