auna Karaboom 100 Wifi Mode D'emploi page 48

EN
48
Software Update
Caution : Before starting a software upgrade, ensure that the unit is plugged
into a stable mains power connection. Disconnecting power during a
software may permanently damage the unit.
Reset to Default
When you choose this item, it will show "Are you sure to reset to default
setting?"
• "YES": it will delete all your present setup and resume to the original
mode
• "NO": it will keep all your present setup and return to the upper menu.
Line output
You can send the radio's signal to other speakers by a 1/8" audio line out.
When you do so, you can control the media volume only by other speakers.
BT
The equipment may be connected to an external device (e.g. smart phone/
tablet) via BT. Media (locally stored MP3 files, streaming music, web radio)
on the external device can then be played though the radio via the BT
connection.
The BT mode is recommended for when there is no network connection
available and you are in close vicinity to the radio with the device to be
connected.
Select BT in the menu.
A BT connection must be established, to be able to send audio files to the
radio via BT.
Establish BT connection
When you select the BT mode on the radio, it is in pairing mode and
searches for BT devices to connect to.
Now activate the BT function on the external device to be connected (for
details, refer to the user manual of the device to be connected). Search for
"Karaboom 100 Wifi" in the list of available devices, select it and make the
connection. Double arrows will appear in the upper left corner of the radio's
display. And a beep will sound the announcement "Connected".
Play media via BT
Once you have established a BT connection you can play music files stored
on the external device through the Karaboom 100 Wifi.
To do this, proceed as follows: