Do not leave fl at batteries inserted, as liquid may leak and damage the remote control
The Speedy 210 combo remote control is a universal remote, so its memory contains data relating to numerous
devices of various brands available on the market.
Each original device has a specifi c code which must be used to set up the remote control.
Therefore, to use Speedy 210 combo you must enter the specifi c code for each device you want to control.
Use one of the following methods to identify the correct code and set it in your remote control:
A) - SMARTPHONE B) - PERSONAL COMPUTER C) - MOBILE PHONE (SMS) D) - MANUAL SEARCH
SETTING CODES USING A SMARTPHONE
Those with a SMARTPHONE (Android / Apple) can use the QR-code opposite to access the online CODE
SEARCH tool directly. Once you have found the code, set it in the remote as described in the ENTERING
THE CODE DIRECTLY section.
SETTING CODES USING A PERSONAL COMPUTER
If you have an Internet connection available, follow the on-line guide on the www.meliconi.com/guida website to identify the
specifi c codes for the devices you want to control. Then set the codes manually as described in the ENTERING THE CODE
DIRECTLY section.
(this service is free; the only expense is due to sending the SMS, according to the fees applied by the mobile service carrier)
For those who do not have access to the Internet, MELICONI now provides the opportunity to receive the codes to
be set on the remote control directly on their mobile phones.
Write an SMS including the following:
Fixed text that must always be entered
indicate the device to be controlled using one of the following
abbreviations: TV - SAT - TER (terrestrial decoder)
set the brand of the device to be controlled
set the model of the device to be controlled, usually found on a
label at the back of the device (if the model is unknown, do not write
anything after the brand)
2M, TV, PHILIPS, 32PFL3614
SETTING THE CODE
SETTING BY MOBILE PHONE
EXAMPLE:
2M,
Type,
Brand,
2M, TV, PHILIPS,
32PFL3614
Model
9