Thermal Cleanse Function; Connectivity; System Information; Sw Version Interface - Ariston NIMBUS M NET Mode D'emploi Pour L'utilisateur

3.6.1

Thermal cleanse function

Thermal cleanse function
Thermal cleanse function
Thermal Cleanse Cycle frequency
Thermal Cleanse start time [hh:mm]
– "Thermal cleanse function": enables/disables the
thermal sanitisation of the DHW cylinder.
– "Thermal Cleanse Cycle frequency" (where
available): sets the frequency of the sanitisation cycle
(24 hours - 30 days).
– "Thermal Cleanse start time [hh:mm]" (where
available): sets the start time for the thermal
sanitisation cycle.
a
If the thermal sanitisation cycle is not completed
within the scheduled time, it will be repeated on
the following day at the specified time.
20 / EN
3.7

Connectivity

Connectivity
OFF
ON/OFF Wi-Fi Network
30 days
Network configuration
01:00
Serial number
Re-configuration
Signal Level
Internet Time
Fig. 47
– "ON/OFF Wi-Fi Network": Enables/disables the Wi-Fi
module connected to the system
– "Network configuration": Enables the configuration
of the Wi-Fi module present in the system. Read the
product instructions for further information.
– "Serial number": Displays the serial number of the Wi-
Fi device installed.
– "Re-configuration": Restores the factory settings of
the Wi-Fi device.
– "Signal Level": Displays the Wi-Fi signal strength on a
scale from 0 to 100.
– "Internet Time": Enables the acquisition of the system's
time from the Internet
– "Internet weather": Enables the acquisition of the
outdoor temperature and the weather conditions from
the Internet
3.8

System information

System info

SW Version Interface

Zone number

System Performance
Diagnostics
3.8.1
Shows the device's software version.
3.8.2
Shows the zone associated with the device.
SW Version Interface
Zone number
User menu
ON
>
>
>
0%
ON
Fig. 48
00.03.02
1
>
>
Fig. 49