Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
3.2.2
Heating/Cooling time schedule - Multi-level
In the multi-level time scheduling, the sequence of operations
is similar to the two-level process (refer to the paragraph "
Heating/Cooling time scheduling - 2 levels"), except for the
following steps:
– The page for setting the comfort and reduced
temperatures will not be displayed.
– In the page for defining the time slot you can select a
dedicated set-point value. The range is 10° - 30°C for
each of the time slots created.
– Up to 12 daily time slots can be selected.
Defining the time slot
Zone 1
Scenario
Free
Start
04:30
End
06:30
16,0°
18,0°
22,0°
15,0°
0
2
4
6
8
10
16 / EN
Sunday
18°
, 0
19,0°
15,0°
22,0°
16,0°
12
14
16
18
20
22
24
Fig. 32
3.2.3
DHW time program
Defining the comfort and reduced set-point temperatures
Domestic hot water
DHW comfort setpoint temp.
DHW reduced setpoint temp.
Set time program
– Turn the selector
setpoint temp. " or "DHW reduced setpoint temp. " .
– Press the selector
selector
to define the temperature set-point.
– Press the selector
– The "Set time program" allows the user to define the day
of the week to be scheduled.
Selecting the type of time schedule: free or pre-set
DHW
Scenario
Sunday
Monday
0
2
4
6
8
10
Tuesday
– Press the selector
– Select "Free" to proceed with the creation of a
customised weekly schedule, otherwise select one of
the pre-set profiles:
– "Family"
– "No lunch"
– "Midday"
– "Always active"
– "Green"
– Press the selector
– Turn the selector
day of the week to be scheduled.
User menu
55°C
35°C
>
Fig. 33
to navigate to "DHW comfort
to enter the edit mode. Turn the
to confirm.
Free
55°
55°
12
14
16
18
20
22
24
55°
Save
Fig. 34
to enter the edit mode.
to confirm "Scenario".
to move to the selection of the
Publicité
Chapitres
Table des Matières
