Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Domestic hot water time schedule profile
35,0°
60,0°
0
2
4
6
8
10
If the system is configured for producing domestic hot water,
Internal temperature
the domestic hot water time schedule profile is displayed.
Required temperature
Domestic hot water heat pump mode
Outside air temperature
Operation mode
If there is a domestic hot water heat pump, the product's
operating mode and the set-point temperature of the water
are shown.
For the meaning of the icons, refer to the paragraph "Complete
home page".
2.6
Stand-by page
10°
21
12:00
Monday 1 March 2021
2.7
Basic functions
Manual room temperature adjustment
The operating mode of the zone associated with the device is
set to MANUAL (1).
Turn the selector to select the temperature value indicated on
the display using the movable cursor near the ring. Press the
selector to confirm.
The display shows the set temperature.
10°
°C
5
10 / EN
35,0°
60,0°
12
14
16
18
20
22
24
Fr 4-JUN 12:30
Fig. 11
20°
21°
16°
55°C
Fig. 12
°
,0
Fig. 13
18:30 11/10/2020
21°
1
,5
19
°
,0
SALOTTO
30
50%
1,5 bar
Fig. 14
Room temperature adjustment in programmed mode
The operating mode of the zone associated with the device
is set to PROGRAMMED (2). During operation in scheduled
programming mode, the set room temperature can be
changed temporarily.
Turn the selector to select the temperature value indicated
using the movable cursor near the ring. Press the selector to
confirm.
The display shows the set temperature.
Turn the selector to set the time until which the change must
be maintained.
Press the selector to confirm. The (3) symbol appears on the
display.
The system interface will maintain the temperature value
until the set time, after which the pre-set room temperature
is restored.
10°
19
SALOTTO
5
°C
Fino alle 20:00
Room temperature adjustment with AUTO function on
If the heating hot water temperature does not match the
desired value, it can be increased or decreased via the "Heating
Settings". The correction bar will appear on the display.
Press the selector to confirm, or press the back button to return
to the previous screen without saving.
2.8
Operation
The main page of the system interface can be customised.
The main page can be used to check the time, date, operating
mode, the set or measured temperatures, the time scheduling
and the active energy sources.
Description
18:30 11/10/2020
21°
3
,5
°
2
,0
30
50%
1,5 bar
Fig. 15
Publicité
Chapitres
Table des Matières
