Zones Management - Ariston NIMBUS M NET Mode D'emploi Pour L'utilisateur

– To access the second page, turn the selector and scroll
the cursor past the last icon of the first page.
Page 2
1
Connectivity System info
Advanced
settings
– Turn the selector
– Press the selector
SYMBOLS
Connectivity
System
information
Screen settings Allows you to configure the main
Advanced Allows you to access the following
Settings
12 / EN
Screen settings
Fig. 17
to highlight the desired menu.
to access the selected menu.
Description
Allows you to enter the settings
of the remote connection service
when a WiFi device is connected
to the bus and allows you to
consult the main diagnostics
information.
Allows you to consult the main
diagnostics information.
display settings.
functions:
- Heating temperature regulation
- Cooling temperature regulation
- Buffer settings
- Advanced settings of the
connected devices
- Units of measurement
- Type of time scheduling
- Measured temperature
correction
3.1

Zones management

The zone menu allows the user to view general information
and to configure the main settings of the zones.
The system allows the user to view up to 6 zones.
Zone 1 Zone 2
20° SET 21° 20°
,5 ,5 ,5
Zone 4 Zone 5
20° SET 21° 20°
,5 ,5 ,5
By selecting the single zone, the following information will be
available:
Zone 1
Operation mode
Zone name
Room T setpoint
Time program
– Turn the selector
– Press the selector
to be edited is highlighted in green).
– Turn the selector
– Press the selector
User menu
Zone 3
SET 21° 20° SET 21°
,5 ,5
Zone 6
SET 21° 20° SET 21°
,5 ,5
Fig. 18
Time program
Zone 1
16,0°C
>
Fig. 19
to highlight the item to be edited.
to enter the edit mode (the field
to set the desired value.
to confirm.
,5
,5