General Description Of Sensor - WEBTEC CT-CAN Serie Mode D'emploi

2.

General Description of Sensor

The flow turbines provide a total solution for measuring flow at test sta-
tions, machine tools and other applications. The flow meter is installed
within the hydraulic circuit.
Typical applications include production inspections, initial commission-
ing or development testing. Because of its compact design, the flow me-
ter can be installed on-site where space is limited. The flow meter is the
perfect tool for measuring the performance of pumps, motors, valves and
hydrostatic gears. The measured readings can then be transmitted using
the standardized CANopen serial bus protocol.
The sensor should only be used for measurements with the "HPM6000
series" measuring instruments. The sensor features an LED which can
signal the current sensor status.
NOTICE
Be sure to use the CT-CAN sensor only in conjunction with
the HPM6000 series measuring instrument. This will ensure
that correct measurements are obtained and that the sensor
is not damaged.
26