Flow Measurements With The Ct-Can Sensor; Calibration - WEBTEC CT-CAN Serie Mode D'emploi

3.7

Flow measurements with the CT-CAN sensor

The flow will be measured according to the settings which you have se-
lected on the measuring instrument or according to the default settings
(for a quick-start measurement).
► Additional information on taking measurements with the sensors and
operating the measuring instrument can be found in the instrument's
operating instructions.
3.8

Calibration

All flow meters are calibrated by default to 21 cSt. Custom calibrations
based on other viscosities or specific flow values are also possible. We
recommend that the flow meter be re-calibrated every one to two years.
34