Klarstein ICEWIND Mode D'emploi page 14

EN
14
INSTALLATION
Assembling the castors
Put the appliance on a flat surface, take out the wrench from foam box, then assemble
the castors.
Note: The back castors are with brake, but the front ones are without (see map 1).
Filling the water tank
• Draw out half of the water tank, then add water (see map 2).
• Pay attention to the level of water tank when add water.(map 3)
• The level of water tank should not over "MAX" scale at any time, when humidifying,
the total level of water tank should not below "MIN" scale.
• Put ice or frozen ice crystal box to the water tank if you want to strengthen the
efficiency of cooling. But the total level of water tank should not over "MAX" scale.
1
brake no brake
2 3